Briefly, for those who are not familiar with the history of this question, let me list its essence. The forum “Classics” I tried to explain his rather long and successful experience in restoring order in the piano when landing place pins in vilberbanke worn out and the traditional methods of restoration required proportion to the net book value of the instrument material costs and, in most cases, are unacceptable for customer. The proposed method not original and is to use pads under the peg, thus clogging chopping replaced it screwed into a seat, which is used for carving chopping. In the process of threading material lining is destroyed, just squeezed out the excess, and given the small pitch, condensing, fills all the voids, thereby creating a significant connection tightness, which provides the necessary tension of the string in a wide range, usually with a significant margin, thereby allowing for a regular setting tool and, as experience shows, for a long time to follow operation. Material pads (corrugated board) has been selected in the process of elaboration of the technology, as has proved most suitable for this purpose. The explanation for this, I find that it is fiber, which is under considerable Pressure screwing of a piece with the wooden material vilberbanka.
By the way, due to the closing theme, I could not thank Mr. KLIZMA for the tip with toilet paper, too, consisting of fiber, it seems to me that its small thickness and uniformity of the material will provide more reliable seal the entire length of chopping, and not only in the damaged area, its beginning, as is the case with corrugated cardboard, Thank you try. As for use as a sanding pad (the method proposed by some American artists), the positive results so far I have not yet reached.