Categories
News

Parts of Engines

Engines are composed of a large number of parts with different functions, which will eventually wear and need to be treated to give back them their functionality. The grinding engine consist of teams that made the whole or part of any kind of motor repair, it should be noted that not only for gasoline engines or diesel. To perform this work you must be guided by the measures of the original parts. Failures in an engine are of a different nature, then we will mention some of the reasons. When the problem are the connecting rods, adapts and recover the connecting rods of engine, interiors of them rectifying and addition is needed, align them and balance them, as well as replace the bushings of piston pins and adapt the same metals. On the other hand, in the case of engine seats, rectification is done through an overhaul of the intake valves and replaced valves tailored guides.

Honing of seat allows a complete and durable seal during the life of the engine and will settle valves and seats. Reconditioning of heads, both for those made of aluminum and cast iron, is performed by changing the valve guides. Subsequently, rectifying the surface and the valve seats; then calibrate the valves and the steps are filled. However, if the problem is in the Mono-blocks of the engine (engine part where the mechanical components are located), requires grinding cylinders and install new shirts for then buffed and/or rectify the surface of the block and line breaks. As a last example may refer to the correction that is required for the recovery of the Pistons.

For this first needs to be done an evaluation of wear on them you have today, check the variation in size as it gains temperature. You can rectify the accommodations of piston rings and regulate the opening of ends when they are already installed on your cylinder. In general, these are the different functions that have the grinding engine, because there is a great multitude of functions in engines and therefore many more parts that may decompose. The sale of grinding engine is regularly offered separately, i.e. that each part is obtained individually. Among the items to be purchased can be found: rectifiers of axes of cam (grinding of cylinders), valve rectifiers, rectifiers of flat surfaces, brake and drum vertical machine Sharpener, among others.