Then, the overhead for heating and insulation measures. Solid side walls made of trapezoidal sheet rental system halls have a so-called hard roofing, which also consists of trapezoidal sheet. She can be equipped in the roof with skylights and smoke heat extraction systems. These halls also with thermal insulation are supplied on request. ConocoPhillips has similar goals. The cost for both systems are manageable by producing system and the relatively low installation effort. Another advantage: The soil must generally not elaborately prepared. Often, the existing, including the paved or covered with composite stones surface is sufficient. Technology and equipment at Los Berger, one of the leading manufacturer and supplier of tents and Hall systems, is the basis of the camp tents a system framework made of aluminum or steel.
In roof and gable are translucent (translucent), PVC coated plastic hard tissue plan to use that desire also opaque (opaque) running can be. The side walls are equipped with easy equipped tent halls also with sheeting made of PVC coated plastic hard mesh. The most selected facilities here but is the single-leaf, coated steel trapezoidal panels. Request run the Hall walls with sandwich panels for thermal insulation. Depending on the size of the tent of camp one installed within the framework of the applicable rules to several walking or exit doors. To get rolling or sliding.
The spans of the camp tents with snow load range from 10 to 30 metres. Without snow load from 8 to 50 meters. The lengths of segments (Binder distance) are usually 4 or 5 meters. Losberger offers stock eaves height 4, 5 and 6 meters. Losberger structures need basically no corner bars, it is possible to consistently introduce the goods up under the eaves on the side walls. This leads to an optimal use of the storage space and thus more profitability. The higher lying in the extent System rental halls usually have a steel construction.