Support Management Information System

by jolly on March 3, 2011

Modern life is made up of alternatives. We are always something to choose. This also applies to our everyday life, and to the profession. In simple situations, we even do not think what to choose and how to do this in a complex – we are building a whole system of decision making and design for this mathematical tool. I think you will agree with me that the choice of software (software) to automate the management of the enterprise or, more precisely, for Support Management Information System (MIS) – a task not easy even for small businesses. And it is not even in the complexity of object choice as such, but for the most part, that from this object can be very depend on the results of your business activity.

This article was born on actual projects, like mine, and together with colleagues, and I have read of seminars devoted to solving the problem of choice. Naturally, that within a short article to discuss all issues related to the process of selecting software for mis difficult, so stop the procedure of selecting software for the automation of enterprise management. Ie consider work, which, in our opinion, should be performed on this project and will state our recommendations for this work. Why is it necessary? Currently, the cost of software products and their implementation is quite high. If also consider any other costs associated with process automation, the amounts are obtained even more. Proceeding from this, leaders must be sure that money on automation will be spent. Ie As a result, we obtain objective, valid from all points of view selection.

In addition, the question of optimal use of budgets allocated to automation. Consider the selection process, as some project. All work on this project can be divided into three phases: planning, selection, preparation of choice, the exercise of choice. During the first phase is carried out detailed planning of all resources of the project group (based on the initiative group or under the direction of the project initiator), the distribution of roles. During the second phase formed by the introduction of targets and requirements for software, developed criteria for comparison, we define a class software. And on the last phase you specify requirements to suppliers and learn their capabilities, and organizes the presentation software, develops and implements requests for quotation, to analyze incoming bids.

Tagged as:

{ Comments are closed }

15 Tips Time Management Training

by jolly on February 21, 2011

1. write all common mistake in time management is that the man is looking at your memory to remember the many details that lead to information overload. Using a to-do list – this is a great way to take control of all projects and tasks and helps to be more organized. 2. Place the task in the list of priorities, a prioritized tasks out of the list, helps you focus and spend more their time on those cases which currently are more important.

Distribute your tasks by category, using a system of priority setting abcd. 3. Build a plan for the week. Spend some time in early weeks to plan the schedule of cases for the week. This short period of time at the beginning of each week will help increase your productivity and evenly with important long-term projects with urgent matters. All it would take you no more than fifteen – thirty minutes. 4. Carry a notepad you never know at what point you will have a great idea or a brilliant idea.

Carry a notepad and always everywhere, so you can record your own thoughts. If you're on a notebook, it will take some time. While you will be able to record their thoughts. By the time you're able to forget her. With the same purpose may be to take a tape recorder. 5. Learn Many people say there is no overload themselves with work just because they say yes, when in fact they should say no.

{ Comments are closed }

Organization Management

by jolly on February 9, 2011

For the technical operation of specific STSiK responsible person command staff (boatmen) in whose superintendence they located. For the technical use of the vessel, STSiK responsible carry out their duties are on duty crew members. The captain of the vessel has the right to transfer the general management of the organization of work on technical operation of the chief engineer. Team composition (boatmen) must know the principles of work performance, especially under his supervision, and must ensure that it is in good state, constant readiness for action, the planned submission of the supervisory authorities to survey and observe the rules of technical documentation. All STSiK be used for its intended purpose.

Near they should be posted instructions on how to prepare them to work, launching, supervision, withdrawal from activities, certified starmehom or First Mate of Captain. In accordance with international regulations, instructions and schemes are posted in English and Russian languages. When you receive the ship commanders face (boatmen) are required to: – check STSiK under his supervision, to see them in operation. – Review for completeness, maintenance documentation and terms of the ship's papers at his superintendence; – personally present subordinates – to check availability of supply, documentation, regulations, national and international regulatory acts – the area in an act of acceptance of the issue and reports to inform the chief engineer or chief mate, the last report to reports, respectively, the captain of the ship. When you change the master or starmeha, or First Mate person commanders (boatmen) report to a report of the technical condition of the area respectively interchangeable chief engineer or the Chief Mate, the last report to a report of technical condition of the vessel master.

The court must be provided with supplies to the standards laid down by national and international regulations, taking into account the region of their operation. For completeness and timeliness allocation of funds for this purpose is responsible owner. Application captain serves as the basis for delivery to a supply ship. Drawing application based on the rules and plans, as well as its actual presence on the ship. Equipment, Spare parts, materials and other supplies used in maintenance and repair, must have certificates confirming their quality and compliance with standards and specifications.

Tagged as:

{ Comments are closed }

Selecting An Advertising Agency

by jolly on February 6, 2011

Today, hardly anyone thinks that the "Advertisement got, got all". But at the same time – "advertising engine of trade" These are two well known all about it. That is why every business owner, sales manager or department head Sales thinks: how, when and where he was this same ad to run, to increase sales. Rather difficult to calculate everything myself, to think and choose wisely. Well if there is a department of advertising at the company, which can be All charge. But even if he is, anyway, turn to the people for whom advertising – it's a profession. For advertising agencies. When selecting an advertising agency should pay attention to the following factors: Destination agency's activities.

Of course, the best way to access full service advertising agency. They have enough professionals in any field of advertising, and, importantly, the media planning department, or at least specialist who can correctly plan an ad campaign, allocate budget to the desired direction. Only this approach allows us to obtain return on advertising. After agreeing on the media plan in the works include specialists from other departments: outdoor advertising, media, radio, etc. And everyone within a certain budget, and the task, selects sites, publications channels. Also, these agencies have in their employ at least one designer. This saves time and money when designing a layout. Second, an important factor – porfolio agency.

It clearly reflect, firstly, the level of clients, where the areas in which most works agency. And clearly show – whether to trust all the promises, which the agency gives you. The third factor – this is what management at the agency. Responsiveness, attention, professional approach the manager to work with clients very often helps to attract and retain customers. Even with some missing the first two factors. Well, the fourth factor – the provision of all documents, photo reports, analysis of the campaign. Pay attention to this when choosing an advertising agency.

Tagged as:

{ Comments are closed }

Transport Security

by jolly on February 6, 2011

Currently, transportation systems of all developed nations are becoming more integrated. This leads to the need to create in each country, an independent body to investigate the catastrophe, which will maintain public confidence in these types of transport and learn from accidents. Improvement of transport safety is a difficult task on a global scale, it is under scrutiny media attention around the world. Any serious accident at any point on the globe immediately covered by all media online, becoming known to millions of people in each country. Everybody wants to know cause of the accident and be sure that will take all measures to prevent similar catastrophes in future.

In this regard, the establishment of independent bodies investigating the accident and the accident is not a luxury but a necessity. No government entity or commercial establishment is unable to investigate its own actions and supervise their activities. Therefore, all countries should have an independent investigative organization, operating separately from other government departments, to oversee the management and operation of transportation systems. Such commissions to investigate disasters and traffic accidents are now available in some countries, but yet in many states the investigation is still conducted by government officials, who themselves write the draft regulations and ensure their compliance. In some countries, may form ad hoc committees led to any officer, not related to transport, to investigate the incident.

In each of these cases laid the potential for an inevitable conflict of interest. By competing interests due responsibility to the security, economy, government and society, the independent investigative commission can serve as guarantors of security in the public interest and provide objective and impartial investigation, as well as the accountability of government and industry. In connection with the ongoing globalization of our transportation systems, those who are investigating the accident and the accident, in particular, aircraft can not operate in isolation. We must all work together, sharing facts investigating accidents and disasters, lessons learned and conclusions to improve the safety and potential means of eliminating the identified problems. Should be fully in force a system of cooperation for the exchange of factual and timely information.

Tagged as:

{ Comments are closed }

Microwave Ovens

by jolly on February 6, 2011

Microwave oven with grill has an optional heating element that will allow you to get crisp on the product. Grill in oven comes in two forms: 1) grill is usually at the top or bottom of the microwave chamber and can move and rotate for uniform processing of the product, and 2) quartz grill is always at the top and "roasting" products are not as strongly as . But the "heaped up" – a microwave oven with grill and convection. They allow you to bake and broil, but they have at the same time sufficiently large and very energy intensive. And there are, you know, not cheap. Management mikrovonovkoy panel on the microwave oven is also of three types: The most simple – is a mechanical control. Turn a single knob, to select the mode and the second to start the furnace. Mechanical control the most reliable, rarely breaks down and is easy to use.

Minus: Can not set the exact time, down to seconds. Models with push-button control have, As a rule, an electronic scoreboard, which, by pressing the buttons you set the time, power mode, etc. Push-button control less reliable than mechanical. Well, the most unreliable, but comfortable and beautiful – Touch management. It's the same button, but only "flush" in the oven. Some modern microwave features include "hints" when, just by pressing a single button, you can cook this or that product. There furnace, which is sufficient to specify the type of product (example: "bird"), they weigh it and install the required mode and time of cooking. Covering microwave chamber can be different: a stainless steel stand highest temperature, but such cells is more difficult to clean.

Coating chamber "under the enamel" is the cheapest, but it does not like high temperatures and long gotovok. Rugged enamel – an inexpensive form of coverage. Camera with such a coating is easily to keep clean. Anti-bacterial coating (invention LG) has a fairly high cost, but not much different from the usual sound enamel. Is it that keeps the heat better. Well, among the latest "gadgets" – is microwave ovens, combined with the pressure cooker, microwave oven with its target in these recipes cuisine of any country, and even microwave ovens, connects to the Internet from oven itself can download a variety of recipes dishes. On the background of such an oven, microwave with built-in radio already looks "not so". Think and choose!

Tagged as:

{ Comments are closed }

Charcoal Grill

by jolly on February 3, 2011

It’s summertime and the grilling smell from the neighbor is in the air and leaves a watering mouth. But who has the opportunity, even in his garden, his terrace or balcony, set up a grill, which should necessarily do it. At best, it tastes naturally in society and to a barbecue invitation, the few people say no. But what do you need apart from delicious meat, salads and drinks for? Of course, a barbecue and the necessary accessories. Good advice is one with a Charcoal Grill. The company manufactures Charcoal grills for every need and budget. Starting from a small table model in stainless steel, which can be set up even on the smallest balcony, over large stainless steel barbecue grill with shelves made of stainless steel or wood, to the luxury model, the Smoker Barbecue Steel Grill, which produces not only delicious grilled food, but also by design a feast for the eyes is.

Price is such a Charcoal Grill 50-900 , depending on the type and character. Once you have chosen for the right grill, charcoal and fire lighters are still needed. These are available from Charcoal or other manufacturers and those who prefer the simpler type of barbecue lighter, can fall back on an electric grill lighters. To make the barbecue a little too unconventional, could also be launched once a grill fish instead of meat when grilling. The special fish roaster particularly suitable for this purpose and the fish can be served in this easy and appetizing. For barbecues very different kind, which offers among others, the company also piglet Charcoal grills on. Which grill model is also decided, on a good stainless steel grill is one, its excellent workmanship, long have a field day.

Tagged as:

{ Comments are closed }

Flowers

by jolly on February 3, 2011

The presence of flowers on different plants, is a result of a change in certain branches, so from an axillary bud flowers begin to birth, leading to the formation of an optimal structure for reproduction. Thus the birth of the flowers is given as a response of the plant, which will be reprogrammed, which starts from the base of the ontogenic cycle, ie vegetative growth, giving rise to the reproductive stage, which flowering takes place. Speaking of flowering, this reference with the origin of flowers on the ground because there is a change of growth since before the growth of the plant was unknown, while the growth to flowering is determined. More precisely the flowering is the establishment of a new cell lineages of plants, which will surely give the result of a new cell identity. When the process of flowering and hence the birth of the flower shoots, the shape of the apex began submit changes. Within the vegetative growth, the shoots, due to their mitotic activity and the accompanying processes of elongation, differentiation and morphogenesis, submit a crecimeitno localized and indeterminate, which will lead to different organs tissue origin of the primary structure of the plant.

Very important in everything that involves the birth and growth of the flower is the reproductive meristem, which is very similar to the vegetative meristem, but the value of reproductive meristem in the flowering process, is that this is a change synchrony in the cell and in the regions of cell division. With this in mind, in flowering occurs changing the activity and the differentiation of vegetative meristem to reproductive meristem, which thanks to its action within the plant, does that originate themselves components of the flower. One of the main factors that induction and training of floral primordia or in simpler terms the birth of flowers are the internal factors such as light and temperature, as these could affect the floral stimulation. Given the above factors influencing flowering, pay great attention to photo-journalism as this item includes different processes of the development of the flower, flowering, onset of dormancy, senescence, abscission, cambial activity among many others, and photojournalism orders and points to the meristem cell division sites, as Elative length of day and night. In an overview of the flowers, the photo-periodic conditions are perceived by the leaves and not directly by the meristem, and the intensity and quality of light stimulus produces a flowering of the plants leaves and then initiate the flowering meristems.

Tagged as:

{ Comments are closed }

Teaching- A Powerful Motivational Tool

by jolly on February 3, 2011

These days, various educational institutions post-secondary level-the world are concerned about the permanence of the students at the university. On many occasions there are many students who enroll in educational institutions of the two years before leaving their learning process. Statistics show that nearly 42% of admitted students do not complete their academic program and manage to graduate. It is almost always of the factors causing the defection of college students. How can teachers be paid to the retention of students in college? What are the factors necessary to achieve greater student retention? A 2000 study conducted at the University of Chicago by Dr. Tino revealed that there are several factors relating to the educational process-essential to promote retention, some of these fac-tors are for example: learning, expectations and support by teachers. To these factors we added motivation.

In the first instance we agree with the Dr. Tino proposal, the student must feel he is learning some new information or expanding the knowledge we already have about the subject matter. The information must be relevant to its context that the student lives. In other words must have a clear picture on how you can apply that knowledge. On the other hand, it is crucial to create high expectations for the student, as the writer of story that keeps the reader hungry for further reading. You must understand that awareness is taking you closer to fulfilling its goals and future success.

These expectations should be clarified at all times through contemporary examples illustrated in the course. The third important they pay to student retention is the support of their teachers. Most college students, especially in the first semester of study need help, social, emotional and academic as to adjust to the changes that accompany the transition from secondary school and university. Teachers can develop them through learning cooperative ability of students of socialization, and teamwork. The motivation is a factor more important to achieve greater student retention. This is a powerful retention tool, this is defined as the ability to move toward the pursuit of goals. The teachers, through their example, empathic treatment, and interactive lessons can certainly promote empowerment in students which will increase your inner desire for aprerder.

{ Comments are closed }

MediLast

by jolly on January 26, 2011

The biomechanics of exercise and isokinetic evaluation that will examine the plantar flexion and dorsiflexion that occurs in the ankle joint, this will look at whether the performance of the ankle joint senior handball players by providing the athlete isokinetic dynamometry sock pro tech model sport sport Medilast brand is increased and to examine whether the use helps prevent lower body injuries for which we study this alternative hypothesis: performance increases the athlete's lower body when using the brand sport socks sport Medilast Methods We conducted a pilot study, comparative and cross with a system of purposive sampling and theoretical consists of 13 athletes trained and active. Underwent isokinetic evaluation and assessment on a Biodex System 3 Pro (Manufacturer: Biodex. Type: System 3 Pro Serial N: 10,011,116. Date of manufacture: 10/2001. Model #: 830-200. Dynamometer: mobile. Computer system: advantage System3 software (3.27). til: ankle.) To quantify the maximum moment of force (peak torque), time to peak torque, trabajomaximo, total work and average power.

The minimum age of subjects was 18 years and maximum age of 32 years. The shows how women's team as a senior at the University of Murcia, of 13 women aged between 18 and 32 years. The average age of the sample is 22.6 years old. The athletes performed two tests, both with the lead foot: described as ankle flexion and extension, unilateral, in concentric-concentric contraction at speeds of 30/segundos (5 repetitions) and 300/segundos (10 repetitions). With 45 seconds rest between sets, at three and four weeks following the same protocol was performed work but giving the athlete of the two tech compression socks pro-sport brand descending Medilast Sport (model running).

Tagged as:

{ Comments are closed }