Categories
News

Alignment Of The Water Molecule To Increase The Water Speed

A submarine can move faster in water if the water molecules are aligned in the same way. This can be done in several ways. A small device on the front of the ship that sends electrical impulses in the flow of water in respect as the submarine to the area. This device could be separate and divide the water flows through its own way of moving water in the desired direction more like a boat breaking the waves of a water skier. The device could also emit a pulse to align the molecules of water in front of the ship so that water would have less drag and therefore faster.

The water could also be semi-ionized by means of magnets, chemicals, Porcelina magnetic encoders, etc any of those products that streamline moving water through the outer surface submarines stop it. You could even use a wetting agent such as a car wash industry or agricultural uses in amounts only slightly. This technique could be used by the torpedo speed. Navy Seals underwater handheld computers or even the motivation of the hulls of large ships. This saves fuel, increases speed and improves the performance and life of the surface of the vessel. A long pole in front of the submarine could be used or passed through sound waves in front of the unit that you can change the frequency characteristics of the water molecules very slightly and only for a few minutes, at which time re-alignment or interruption of the submarine passing through the area without effort. This same technique could be used inverted as a weapon to stop the boats, underwater unmanned vehicles, interrupt incoming torpedoes (by turning it into an area where the acceleration of the torpedo and then adjust the molecules in the opposite way to stop or pre- ordnance). It could also be used to keep sharks out of the water near the beaches, since they are made of swimming through her that the water department much more difficult.

A submarine could launch small balls of small micro-encapsulated beads of wetting agents Gell ahead of its path if it is a cop material desolve in saltwater as it is dissipated in front of the ship. They can be sent ahead of a vessel by an unmanned craft, crafts, or even flying unmanned underwater UAV unmanned aerial vehicle. These techniques are simply making and testing and testing of this type if they have not been yet to be proven. A submarine could ocated with a magnetic layer to adjust the water molecules crossing the surface due to a charge being manufactured in the coating as the self-cleaning of glass or a small load on the front edge of the submarine, which responsible for the increased resistance that is common in the back of an object that flows through a fluid air or water. There is a problem with ROI deminishing make a submarine, more streamlined, lighter, better materials, smoother surfaces, as we have done all this and wrestled with the issues to develop the largest submarines in the world has ever known, is not it time we started working on the other component After all it is the sub, the propulsion system and water. Once you have created the best in others, it’s time to realign the chaos of the water molecules to improve their efforts. God does not care, I could even imagine the idea soon.

Categories
News

Online Sales

During the brief history of Internet progress has been remarkable. After the dotcom boom and its precipitous decline, the Internet market has been driven by a few. Most investors, both small, medium and large, are reluctant to invest in online businesses. If an online survey sites selling will emerge Amazon, eBay, Free Market, and online sales sites of manufacturers who also manage physical establishments as Gap, Ann Taylor, etc.. Details can be found by clicking Atlantic Contracting or emailing the administrator. Who recognizes this as an opportunity, there are options business.

A whole new generation is growing up with Facebook, MySpace, Hi-5, Twitter, Squidoo, and part of their daily lives. The computer is the new phone, meeting place, library, all in one. This generation can not deal with credit cards but they will in a few years and buy online is the most logical choice. Official site: Peter Hennessy . With the exception of certain products and goods, they will be willing to buy online. What logical justification can go out and find a pair of sneakers at the mall, if the tips of my fingers I have thousands of options? Not only that you can compare prices, quality and if they want to put my name and I make them in my favorite colors. This market is slowly beginning to happen. Outside the giants I mentioned and some others, there are small businesses that are seeing business opportunities online.

They know your audience, deal with e-marketing, SEO know, up to date on changes and strategies of search engines, and little by little they have influence in the direction you are taking the attempt of the 21st century. If you are considering an online business, go ahead. Do not think much, investigate, learn, read and start. How many businesses can start with virtually no capital and no inventory? Do not quit your job yet! But start taking the steps and test.

Categories
News

Microwave Transition Analyzer

Cost of energy losses: they are costs that occur throughout the study period and its value is proportional to the square of the load, which can remain constant or change during the plan period, but it is necessary to estimate since it can not be known a priori. Cost of maintenance: they are costs that occur throughout the period under consideration and, in the case of lines and cables can be considered proportional to the size of the network and depending on the type of conductor used, the type of run ( sitting, stretching, subway, …) or geographical issues (salinity, ice, trees, level Keraunic). To determine the quality, quantity, flow and optimization of these networks, using so-called Network analyzers are instruments capable of analyzing the above properties of electrical networks, especially those properties associated with reflection and transmission of signals power, known as scatter common and often described as the lowest quality. Basic architecture of a network analyzer models found most often in the market are the two ports, but there are also four-port models, and some have some improvements to its easy operation, such as touch screen and possibility to connect a mouse or keyboard using PS / 2 or USB, including the newer models have a Windows-based platform so that its operation is simplified considerably. A new category of network analyzers is the MTA (Microwave Transition Analyzer), which means microwave transition analyzer, or LSNA (Large Signal Network Analyzer), which means network analyzer long signals, which measure the amplitude and phase fundamental harmonic. The MTA was first marketed the LSNA, but were missing the first few options for easy calibration are included on the version LSNA. Calibration The calibration of a network analyzer is a high precision process which should be taken into account both the impedance which is operating (50 Ohms, the cell phone or 75 Ohms for other applications) and the conditions under which the equipment is operating.

For this reason, and depending on the number of parameters-S is required to measure the process can be long and tedious for the amount of times you have to repeat. The calibration standard uses three test devices called OPEN (open network), SHORT (short circuit network) and THROUGH (wired network), which must be connected to the ports of the analyzer so that it can compare and make a difference between these three modes, these data are stored in a register and each registration must be calibrated independently and the time you make a change to the system under study. Another type of instrument for the calibration of network analyzer calibration module is the electric (E-Cal), which connects to this and is automatically recognized and has a higher precision equipment Manual calibration mentioned above. The only apparent disadvantage of this device is to be expected to reach its operating temperature before use. There are currently analyzers multifunctional next-generation networks that substantially improve the performance: Accuracy: Some computers have an accuracy class of 0.06%. Robustness: Backed by 4 years of warranty. Connectivity: This is the meters with more connectivity options market, the Nexus 1672, including all plasma parameters read in a customizable web page.

Categories
News

Leveraging Strength

Finally, I aimed for the case that a project be undertaken independently. In addition it assists by providing physical tools such as access to computers and e-mail accounts, documents and databases, etc.. Also included are exercises to improve communication and employee monitoring of one year from getting re-enter another organization to verify their degree of integration into the new environment. What is outplacement? Otherwise noted, trachea is to provide a consultancy in the process of dropping out of the organization of its partners, aimed at reducing emotional distress, to guide people on how to leverage their strengths, defining goals and planning their career in an efficient and successful . In other words, it means Outplacement, a planned or assisted dissociation. Process consulting, support, guidance and training aimed at people about to leave the company or be transferred to another post, the search for new employment or work quality, level or conditions similar to those of their previous occupation in the shortest time possible because each experience is individual and each situation is different, the work program has a strong personal orientation, through a package of tools (both technical and psychological) that help you overcome and deal with the separation work, with an optimistic view of their own future. Definitely, positively redirect trataa executives who are disengaged, redefining their professional horizons and creating an optimistic view about their own future through a series of tools adapted to each individual case and help design new strategies to achieve career objectives. Involves a whole a reeducaciona executive, updates on market realities and how your profile can be received in the networks of contacts to help build specific training.

Categories
News

Building Mechanical Parts

This is an intellectual activity as a premise requires two powers by the person or persons who perform and are knowledge and wit. It is usual to find in companies that engage in this activity, people called engineers term derived from the construction of mechanical parts or devices, a word which in turn refers to the ingenuity and summary tacitly potential experiences and knowledge with a strong management mathematics and natural sciences Engineering is sometimes conceived as the art of applying scientific knowledge to the invention and it takes a very interesting mix of wisdom and inspiration. The design process begins by identifying clear and detailed requirements with the customer (including internal) on the element to be designed, as well as the constraints are such as economic, health, environmental, social, physical or technical, maintenance, etc., the next step is development of possible solutions or alternatives to these limitations, meaning that you can not always meet all the highest degree and always will, define the limits in the form of ranges or tolerances for them, it is important at this stage comment that, due to the current knowledge of mathematics and the use of computers so widespread, it is possible to simulate each of the options with low costs and waste are therefore very popular CAD systems (systems for computer-aided design), then makes the design of the production, ie what are the next step for both the manufacturing itself, and to support processes, resources, logistics, quality control, sales, post sales service, etc. It is almost always recommended the development of a prototype, which is studied in detail the behavior and in many cases their interaction with buyers, it is not uncommon to hear fairs where they are known as Concept Designs, who are seeking, as well as in all areas technique, also know the views of other specialists, as well as the general public, say in passing that, these activities respond to a management model focused primarily to the customer. The importance of prototypes reaches the end of talk of “pilot plant” to produce a given product, that in order to acquire full information on all the variables that interact in the design and product development. The activity of design of mechanical parts is currently a very important connotation essentially involves the ability to be easily replaced, because it generally is subjected to erosion or wear, requiring its change over a period of time, it becomes relevant to the extent that industrial production requires very high availability of equipment as it seeks to reduce fixed costs in this way, and an ROI in the shortest time possible..

Categories
News

Performance Leadership

The energy and vitality are essential to leadership. The two main sources of value at present are time and knowledge. Find new ways every day to use them better. The key responsibility of leadership is thinking about the future. Nobody else can do for you. Read one hour each day on your field will give you an advantage over your competition.

The inevitable crisis. All that matters is how you deal against it when it appears. Circumstances do not make the man; simply reveal himself. Regularly practice ways to anticipate the crisis. Think about what might fail and then get ready against that. The three C's of leadership are the consideration, caring and courtesy. Be nice to everyone.

Respect is the key determinant of high performance leadership. The performance depends on how much people respect you. The value of a promise is the cost of keeping your word. The weaker your core skills sets the culture to which you will use your other skills. Learn to use computers. It uses the technology to boost your ability. Whatever has brought you to where you are is not enough to keep you there. To earn more you need to learn more. Self-discipline is the ability to make you do what you do when you must, auque not feel like it. Outsource any function and activity that could possibly make another person. Different people require different types of leadership at different times in their lives. Offer strong leadership and a clear advice to unskilled persons.

Categories
General

Ecosystems Create Balance Between its Members

As anyone who has taken any elementary biology course should know, the world is an entangled web of interrelationships between organisms and the environment in which they live. There is no plant, insect animal, or bacteria which does not have a crucial role to play in the balance of nature. Some change made in any one of the myriad parts of the whole can set the entire system off balance, creating a new system with a different balance, which can in many instances spell disaster for some of the parts. Unless one is willing to risk harming some part of the system, be it animal, mineral or vegetable, it is best not to interfere.

One famous example of a simple system which was interfered with at the cost of worse results was the case of the city that had a bad problem with stray cats. The city decided it was dangerous, unsightly and unhygienic to have so many stray cats around. The city managed to get rid of all their cats one way or another, and suddenly they had a much worse problem on their hands; the population of rodents, rats and mice, soared. Unbeknownst to the townspeople, the cats had been keeping the rodent population to a minimum. Now, without the cats, the people had to face the much worse problem of rats roaming around.

The lesson is that every ecosystem has a balance which took years to arrive at, and any tampering is bound to result in a change, which could easily be worse than the problem which was attempted to be solved.